TiToeKi Resistor 50W 25 Ohm Aluminum Case Wirewound Screw Tap Chassis Mounted Load Resistors Adapters Compatible with Nest Hello Doorbell, Ring Doorbell (2 Pack)
- Mounting type: chassis mounted with Screws. Color: yellow.
- Resistance value: 25 Ohm; Tolerance – 5%; power Rating: 50W. Weight: 50G; package content-2 x aluminum Housed resistor.
- Body Size: mounted hole size-3.5mm/0.137″; total size-72 x 22 x 15mm/ 2.8″ x 0.9″ x 0.6″ (l*w*t).
- Product: Aluminum Housed Resistor–aluminum housing for heat dissipation, suitable for cooling plate installation, can be used in atrocious environment.
- Adapted To: 25 Ohm resistor Compatible with Ring Doorbell, Nest Hello Doorbell, and transformer, power supply, car LED light, transducer, audio, frequency converter, frequency divider, elevator, arena audio and automation equipment in industry.
TiToeKi 50W 25 Ohm Resistor Aluminum Case Wirewound Screw Tap Chassis Mounted Load Resistors Compatible with Ring Doorbell, Nest Hello Doorbell 2PCS
- Resistance value: 25 Ohm; Tolerance – 5%; power Rating: 50W. Weight: 50G; package content-2 x aluminum Housed resistor.
- Body Size: mounted hole size-3.5mm/0.137″; total size-72 x 22 x 15mm/ 2.8″ x 0.9″ x 0.6″ (l*w*t).
- Product: Aluminum Housed Resistor–aluminum housing for heat dissipation, suitable for cooling plate installation, can be used in atrocious environment.
- Mounting type: chassis mounted with Screws. Color: green.
- Adapted To: 25 Ohm resistor Compatible with Ring Doorbell, Nest Hello Doorbell, and transformer, power supply, car LED light, transducer, audio, frequency converter, frequency divider, elevator, arena audio and automation equipment in industry.
Qjaiune 2 Pack Aluminum Case Resistor 25W 100 Ohm Housing Wirewound Resistors, Screw Tap Chassis Mounted Load Resistors Adapters for Ring Video Doorbell
- ✿25W 100 Ohm Resistors: This wirewound resistor has a power of 25 watts, a resistance value of 100 ohms, and a 5% tolerance. Wire wound resistor working voltage is 220V, Max. overload voltage is 220V.
- ✿Better Dissipation Capacity: The aluminum shell of the housing resistor can effectively improve the heat dissipation capacity. Wirewound resistor has screw tabs, you can fix the resistor on the radiator, and the heat dissipation effect is better.
- ✿Package Contains: 2 x wirewound resistor, body size: 1.04″ x 0.62″ x 0.59″ / 26.6 x 15.8 x 15mm (L*W*H), lead size: 0.51″ / 13mm, mounted hole size: 0.14″ / 3.5mm.
- ✿Wide Application Range: Wirewound resistor can be fixed with screws, and two rods with holes can also be used for soldering. It is very suitable for inverter, LED lights, speakers, frequency divider, servo industry and other industrial control.
- ✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution.
It is important to know the advantages of the mounted load resistors product
It is not always easy to know which mounted load resistors product will serve them best. Everyone wants to buy the best mounted load resistors product available.
We give you some tips for analyzing whether a product is worth buying here. You are purchasing a mounted load resistors product, but before you make the decision to buy.
You will be aware and won’t make a purchase that could cause problems in the future. The best way to buy a mounted load resistors product is by reading reviews and comparing the pros and cons.
uxcell 25W 4 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis Mounted Aluminum Case Wirewound Resistor Load Resistors, 21mm Mounting Distance 2 Pcs
- 25 Watt and 4 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 25W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 1.1 inches(28mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
uxcell 25W 12 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis Mounted Aluminum Case Wirewound Resistor Load Resistors Gold Tone 2 pcs 25W12RJ
- 25 Watt and 12 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 25W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 1.1 inches(28mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
uxcell 50W 6.8 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis Mounted Aluminum Case Wirewound Resistor Load Resistors Gold Tone 2pcs
- 50 Watt and 6.8 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
The pros of buying the best quality mounted load resistors products
Have you ever felt like the best mounted load resistors products are too expensive? Have you thought about what the pros of buying the best products would be?
It’s easy to get lost in all of that advertising and go with a cheaper alternative, but the best products are the ones that can be used for a long time and provide top-notch customer service. The best way to find these items is by reading reviews from other customers who have experienced them first hand.
First off, if you’re going to spend your hard-earned cash on mounted load resistors products, then make sure that it lasts. Spending less now means having to buy again sooner or paying more for repairs later. You’ll save time and money when you buy quality items because they will last longer than those cheaply made knockoffs. Second, not only will your purchase last longer, but it will also perform better!
The pro about buying the best product is that you get your money’s worth because they have excellent performance. If you buy low-quality mounted load resistors products, then you will have to replace them every year or so.
uxcell 50W 60 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis Mounted Aluminum Case Wirewound Resistor Load Resistors Gold Tone 1pcs
- 50 Watt and 60 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Always buy mounted load resistors products with high quality
What are the reasons to buy mounted load resistors products with high quality? It will last you much longer than any cheaper option. Even though it is more expensive, it’s worth the investment because of its durability and how well-made it is.
When you buy a mounted load resistors product, it will have an effect on your life. You want to make sure that the product is high quality so you are not wasting your time and money on something that does not work for you.
Many people are looking for high-quality mounted load resistors products, but they don’t know where to find them. It can be hard to tell the difference between a product that is cheaply made and one that will last. If you want something with more value, then we can help you find the best mounted load resistors products with our expert reviews.
uxcell 50W 40 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis Mounted Aluminum Case Wirewound Resistor Load Resistors Green 2 pcs
- 50 Watt and 40 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
uxcell 25W 6 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis Mounted Aluminum Case Wirewound Resistor Load Resistors Gold Tone 2 pcs
- 25 Watt and 6 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 25W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 1.1 inches(28mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
This blog is very good, it lets you know about good and affordable mounted load resistors products.
The right mounted load resistors product can bring you a great deal of satisfaction. We recognize that deciding which mounted load resistors product is right for you can be confusing when faced with a vast amount of choices.
Luckily, we’ve narrowed it down for you and found the best quality mounted load resistors products in your budget.
If you are searching for valuable mounted load resistors products to improve your life, check my reviews. I have been using lots of good mounted load resistors products and would like to recommend them to you.
uxcell 50W 20 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis Mounted Aluminum Case Wirewound Resistor Load Resistors Green 2 pcs
- 50 Watt and 20 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
So, if you are looking for some of the best mounted load resistors products in a certain category, check out our list. We have scoured the internet and found what we believe to be the cream of the crop when it comes to these items. And, as always, keep checking back with us because we will continue to update this page as new and better products come along.
Have you tried any of the items on our list? Let us know how you liked them in the comments below!